Bring the Las Vegas Strip Home with This Easy DIY!
Bring the “slots” to your Casino-themed party with this DIY that takes under an hour but makes a big impact! It’s the perfect way to anchor your drink station or snack bar with some high-roller energy. (I love this part—it really ties the whole room together!)
This page may include affiliate links. If you click and purchase, I may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases. Learn More
What You’ll Need for Your BAR BAR BAR Sign
Materials:
- 1 sheet of Black Foam Core
- White Posterboard or Cardstock
- Double-Sided Tape (or your favorite adhesive)
Tools:
- Cricut machine (If you don’t have one, you can totally free-hand, trace, or print these!)
How to Make the BAR BAR BAR Sign
Step-by-Step Instructions
1. Cut Your Letters
Cut out the word “BAR” three times. I used my Cricut on white posterboard for that clean, crisp look.
2. Plan the Layout
Before you start taping, play around with the layout on your black foam core to confirm spacing and alignment. (This was tedious but so worth it to get it straight!)
3. Tape it Up
Add double-sided tape to the back of each letter.
4. Secure the Letters
Once you’re happy with the placement, press the letters down lightly on the board. (Don’t press too hard or you might leave impressions in the foam core—yikes!)
5. Finish Strong
Repeat until all three “BAR”s are perfectly placed.
Pro Tip: If you use white vinyl, you can skip the tape and peel-and-stick! I’d still recommend transfer tape to keep everything lined up.
Time + Cost
Time: >45 minutes
Cost: Under $4
Related Party
This DIY was part of our Cupid’s Casino Party—see the full party hub here for more games, recipes, and hosting tips.
Looking for more creative ideas? Check out our other DIY blog posts here →
Don’t forget to pin this project for later!